Buy Metal Online

HomeAccessories

Accessories

Showing 1–16 of 64 results

View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Angle 6063T6 is an angle shaped 6063 Aluminium Alloy. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best-suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes.

ALUMINIUM 6063T6 ANGLE

 £26.90 – £170.00
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Angle 6082T6 is an angle shaped 6082 Aluminium Alloy. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility

ALUMINIUM 6082 ANGLE

 £28.10 – £90.10
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Channel 6063T6 is a channel shaped 6063 Aluminium Alloy. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes.  
Specifications BS EN 573-3 Characteristics Weldability – Gas: Good Weldability – Arc: Very Good Weldability – Resistance: Good Brazability: Very Good Solderability: Good Workability - Cold: Average (Acceptable) Machinability: Good Uses Common uses of Aluminium Channel 6063T6 include: Architectural Applications Extrusions Window Frames Doors Shop Fittings Irrigation Tubing More Info Density: 2.70 g/cm³ Melting Point: 655 °C Thermal Expansion: 23.5 x10^-6 /K Modulus of Elasticity: 69.5 GPa Thermal Conductivity: 201 W/m.K Electrical Resistivity: 0.033 x10^-6 Ω .m Electrical Resistivity: 52 % IACS

Aluminium Channel 6063T6

 £133.66 – £309.71
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Flat Bar 6063T6 is a flat shaped 6063 Aluminium Alloy bar. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes.

Aluminium Flat Bar 6063T6

 £23.10 – £118.58
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Angle 6082T6 is a flat shaped 6082 Aluminium Alloy bar. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Aluminium Flat Bar 6082T6

 £23.70 – £273.84
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Hexagon Bar 6082T6 is a hexagonal shaped 6082 Aluminium Alloy bar. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Aluminium Hexagon Bar 6082T6

 £0.00 – £112.86
Product Weight: 15kg
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Round Tube 6063T6 is a tubular shaped 6063 Aluminium Alloy. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes

Aluminium Round Tube 6063T6

 £21.44 – £48.21
View Details Select options This product has multiple variants. The options may be chosen on the product page
Aluminium Round Tube 6082T6 is a round tubular shaped 6082 Aluminium Alloy. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Aluminium Round Tube 6082T6

 £29.77 – £51.02
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Angle CZ121 is an angle shaped CZ121 Brass Alloy. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion. CZ121 (CW614N) Free Machining
  • Brass Corrosion Resistance: Excellent Cold Working: Poor Hot Working: Excellent Heat Treatment: Good Machinability: Excellent Weldability: Excellent Common uses of Brass Angle CZ121 include: High Speed Machined Components Architectural Extrusions Locks
  • Hinges Density = 8.47 g/cm³ Melting Point = 875 °C Thermal Expansion = 20.9 x10^-6 /K Modulus of Elasticity = 97 GPa Thermal Conductivity = 123 W/m.K Electrical Resistivity = 0.062 x10^-6 Ω .m Proof Stress = 220 - 350 MPa Tensile Strength-360 - 500 MPa Hardness Brinell = 90 - 160 HB Elongation A = 20 - 5 %

Brass Angle CZ121

 £45.00 – £250.00
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Angle CZ130 is an angle shaped CZ130 Brass Alloy. CZ130/CW624N Brass Alloy is a machinable brass with an attractive yellow lustre. CZ130/CW624N Brass Alloy is a duplex or alpha/beta alloy. CZ130 (CW624N) Yellow Brass
  • Corrosion Resistance: Good Cold Working: Fair Hot Working: Excellent Machinability: Good Weldability: Excellent Common uses of Brass Angle CZ130 include: Shopfittings Machine Parts Instruments Electrical Appliances Hinges More Info Density = 8.44 g/cm³ Melting Point = 890 °C Thermal Conductivity = 109 W/m.K Proof Stress = 150 - 220 MPa Tensile Strength = 350 - 420 MPa Elongation A50 mm = 20 - 30 % Hardness Vickers = 90 - 120 HV

Brass Angle CZ130

 £55.00 – £105.00
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Channel CZ121 is an channel shaped CZ121 Brass Alloy. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion.   • Specifications CZ121 (CW614N) Free Machining Brass • Characteristics o Corrosion Resistance: Excellent o Cold Working: Poor o Hot Working: Excellent o Heat Treatment: Good o Machinability-Excellent o Weldability-Excellent • Uses Common use of Brass Channel CZ121 include: o High Speed Machined Components o Architectural Extrusions o Locks o Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Channel CZ121

 £49.90 – £149.70
Product Weight: 15kg
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Half Round Bar CZ121 is a semi-circle shaped CZ121 Brass Alloy bar. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion. CZ121 (CW614N) Free Machining Brass • Corrosion Resistance: Excellent • Cold Working: Poor • Hot Working: Excellent • Heat Treatment: Good • Machinability: Excellent • Weldability: Excellent Common uses of Brass Half Round Bar CZ121 include: • High Speed Machined Components • Architectural Extrusions • Locks • Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Half Round Bar CZ121

 £0.00 – £82.91
Product Weight: 15kg
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Hexagon Bar CZ121 is a hexagonal shaped CZ121 Brass Alloy bar. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion. • Specifications CZ121 (CW614N) Free Machining Brass • Characteristics o Corrosion Resistance: Excellent o Cold Working: Poor o Hot Working: Excellent o Heat Treatment: Good o Machinability: Excellent o Weldability: Excellent • Uses Common uses of Brass Hexagon Bar CZ121 include: o High Speed Machined Components o Architectural Extrusions o Locks o Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Hexagon Bar CZ121

 £59.59 – £393.88
Product Weight: 25kg
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Round Bar CZ112 is a round shaped CZ112 Brass Alloy bar. CZ112/CW712R, often referred to as Naval Brass is typically used in a range of marine and mechanical applications,   • Specifications CZ112 (CW712R) Naval Brass • Characteristics o Corrosion Resistance: Very Good o Machinability: Fair • Uses Common uses of Brass Round Bar CZ112 include: o Heat Exchanger Tube plates o Bolts o Nuts and Rivets o Hardware for Underwater Applications o Machined Components • More Info o Density = 8.40 g/cm³ o Melting Point = 900 °C o Electrical Resistivity = 0.066 x10^-6 Ω .m o Proof Stress = 160 - 200 MPa o Tensile Strength = 340 - 400 MPa o Hardness Brinell = 80 - 135 HB o Elongation A = 25 - 20 %

Brass Round Bar CZ112

 £0.00
Product Weight: 25kg
View Details Read more
Brass Round Bar CZ121 is a round shaped CZ121 Brass Alloy bar. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion.   • Specifications CZ121 (CW614N) Free Machining Brass • Characteristics o Corrosion Resistance: Excellent o Cold Working: Poor o Hot Working: Excellent o Heat Treatment: Good o Machinability: Excellent o Weldability: Excellent • Uses o High Speed Machined Components o Architectural Extrusions o Locks o Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Round Bar CZ121
Product Weight: 25kg
View Details Select options This product has multiple variants. The options may be chosen on the product page
Brass Round Tube CZ108 is around shaped tube of CZ108 Brass Alloy. Known as basis brass, CZ108 Brass Alloy is one of the most popular grades of brass due to its hot and cold working capabilities. Supplied primarily as a sheet grade, this material is often used for general purpose and simple forming operations. It offers very good corrosion resistance in normal environments and good machinability at slow speeds. • Specifications CZ108 (CW508L) Basic Brass • Characteristics o Corrosion Resistance: Good o Cold Working: Excellent o Hot Working: Fair o Weldability: Excellent • Uses Common uses of Brass Round Tube CZ108 include: o Scientific Applications o Radiators o Heat Exchangers o Decorative • More Info o Density = 8.44 g/cm³ o Melting Point = 916 °C o Thermal Expansion = 20.5 x10^-6 /K o Modulus of Elasticity = 103.4 GPa o Thermal Conductivity = 116 W/m.K o Tensile Strength = 440 Min MPa o Hardness Vickers = 115 Min HV o Proof Stress = 320 Min MPa o Hardness Brinell = 110 Min HB o Elongation A = 10 Min %

Brass Round Tube CZ108

 £52.90 – £107.90
Product Weight: 25kg
0