View DetailsSelect options
This product has multiple variants. The options may be chosen on the product page
Welding Clamp - Nickel plated for good corrosion resistance, this welding clamp also has adjustable opening and a useful quick release lever.
C-Type Welding Clamp - This C-type welding clamp is nickel plated for good corrosion resistance, with adjustable opening and a quick release lever.
3 piece Welding Clamp Set - Made from Nickel-plated steel for good corrosion resistance this 3 piece welding set comes with a 240mm sheet metal clamp, 280mm welding clamp and a 275mm C type clamp. All have adjustable opening and quick-release levers.
Sheet Metal Clamp - With an adjustable opening and quick-release lever this useful sheet metal clamp has also been nickel plated for good corrosion resistance.
View DetailsSelect options
This product has multiple variants. The options may be chosen on the product page
Welders chipping hammer for use to remove welding slag and welding spatter. 250mm long and comes with one pointed end, one chisel end and a sprung handle to prevent kickback.
View DetailsSelect options
This product has multiple variants. The options may be chosen on the product page
Welding magnet 100mm, Welding magnet 125mm - Holds metal in place at 3 different angles leaving your hands free to work. Suitable for use at 45°, 90° and 135°.
Welding Magnet 27.2kg (60lb), Welding Magnet 18kg (40lb) - For holding steel parts in place at 30°, 45°, 60°, 75° and 90° angles leaving your hands free for working. Great for use for welding, soldering, assembly marking off and pipe installation.
View DetailsSelect options
This product has multiple variants. The options may be chosen on the product page
Our welding rods are general purpose electrodes for welding high tensile sheets ad low alloy steel. The weld metal shows an excellent low temperature toughness and high crack resistance. They can be used in all positions on AC and DC (AC>70V). Type of coating is Hydrogen Potassium.
View DetailsSelect options
This product has multiple variants. The options may be chosen on the product page
Mild Steel Welding Rods 3.2mm - E6818-W2 4kg Pack
If you want to read what the manufacturer says then read below but if you want the overview then this bit is for you. The MacTrode E6818-W2 rod is a low hydrogen MMA rod that is designed specifically for weathering steels such as Corten.
Because of the above if you get these rods damp and require to rebake them then it does require a higher heat for a slightly longer than normal time. 300 to 350 degrees C for 1 to 2 hours.
These rods are made in the UK.
A low hydrogen, basic flux coated electrode on a low carbon mild steel core wire with an extruded moisture resistant chemically basic flux which has controlled iron powder addition. The moisture resistant coating gives a very low weld metal hydrogen levels. The electrode recovery rate in respect to the core wire is approx. 120%. Smooth arc, low spatter, easy strike and restrike. The electrode is mainly used for weathering steels containing a similar controlled addition & is claimed to offer a threefold improvement in corrosion resistance compared with plain C, Mn steels. The weld metal also resists preferential corrosion in sea water, particularly in arctic waters high in oxygen & salinity,
& has applications for welding micro alloys & carbon manganese steels in ice breaker vessels & offshore structures. Applications also include architectural structures, bridges & exhaust gas flues. Materials to be welded include Corten A, B1 (b. steel, US Steels) and other proprietary designations. BS4360 Grade WR50A to WR50C, ASTM A588 Grades A, B, C, K. Din 1.8960, 1.8961, 1.8963.
Mild Steel Welding Rods 2.5mm - E6818-W2 4kg Pack
If you want to read what the manufacturer says then read below but if you want the overview then this bit is for you. The MacTrode E6818-W2 rod is a low hydrogen MMA rod that is designed specifically for weathering steels such as Corten.
Because of the above if you get these rods damp and require to rebake them then it does require a higher heat for a slightly longer than normal time. 300 to 350 degrees C for 1 to 2 hours.
These rods are made in the UK.
A low hydrogen, basic flux coated electrode on a low carbon mild steel core wire with an extruded moisture resistant chemically basic flux which has controlled iron powder addition. The moisture resistant coating gives a very low weld metal hydrogen levels. The electrode recovery rate in respect to the core wire is approx. 120%. Smooth arc, low spatter, easy strike and restrike. The electrode is mainly used for weathering steels containing a similar controlled addition & is claimed to offer a threefold improvement in corrosion resistance compared with plain C, Mn steels. The weld metal also resists preferential corrosion in sea water, particularly in arctic waters high in oxygen & salinity,
& has applications for welding micro alloys & carbon manganese steels in ice breaker vessels & offshore structures. Applications also include architectural structures, bridges & exhaust gas flues. Materials to be welded include Corten A, B1 (b. steel, US Steels) and other proprietary designations. BS4360 Grade WR50A to WR50C, ASTM A588 Grades A, B, C, K. Din 1.8960, 1.8961, 1.8963.
